Customization: | Available |
---|---|
Type: | Spray Booth |
Certification: | CCC, CE, ISO9001 |
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Outside Dimension (mm) | 7006*5546*3450(L*W*H) | Inside Dimension(mm) | 6900*4000*2650(L*W*H) |
Front Door(mm) | 3000*2600(W*H) | Service door (mm) | 800*2000(W*H) |
Total Power | 20KW | ||
Cabin system | Wall panel | 50mm EPS sandwich panel, steel sheet thickness: 0.426mm | |
Ceiling panel | 50mm rock-wool panel. | ||
Basement | 300mm depth, full galvanized grids basement | ||
Ramps | Three pieces 2000*900mm ramps | ||
Glass | 5mm safety tempered glass | ||
Windows | Square glass windows | ||
Air Make-up System | Air Inlet fan system | 1*7.5kw turbo fan, (explosion-proof motor, Ex rated, for option) | |
Exhaust fan system | 1*7.5KW turbo fan, (explosion-proof motor, Ex rated, for option) | ||
Ai capacity for fresh air | 25000m3/h | ||
Air Flowing speed | 0.3m/s in empty booth | ||
Air ducting | 8 meters straight ducting, one flop damper and one weather hood. | ||
Water- based system | Ceiling nozzles | Both sides of the ceiling with direction adjustable stainless nozzles, total 36pcs | |
Ceiling fans | 1.5kw centrifugal fans, air capacity 4500m3/h, air pressure 570Pa, rotate speed 900r/min, total air capacity 9000m3/h; 1 set of separate fan for each side, air inlet with filters, total 2 sets | ||
Corner drying machine | Two corner dryers, each rear corner with 1 drying machine, each drying machine with 4 direction adjustable nozzles and 1*1.5kw electrical heating tube, total 8 nozzles and 2 electrical heating tubes | ||
Corner drying fan | 0.2kw centrifugal fan, air capacity 1000m3/h, air pressure 525pa, rotate speed 2800r/min, each rear corner with 1 set, total 2 sets | ||
Purification System | Pre-filter | G3 grade, Pockets filter. | |
Ceiling filter | EU5 / F5 | ||
Floor filter | green fiber glass filter / G3 grade | ||
Exhaust fan Filters | green fiber glass filter and active carbon | ||
Heating System | Heat Exchanger | SUS304 material, argon arc welding. | |
Heating burner: | RielloG20 diesel oil burner(gas burner for option) | ||
Heating productivity | 180000Kcal/h | ||
Spray to baking switch | 20N BELIMO brand electrical damper | ||
Chimney ducting | 3 meters stainless ducting and one chimney elbow | ||
Max heating temperature | 80degrees | ||
Fuel consumption | 6-8L /vehicle | ||
Lighting System | Ceiling lights | 8 Units, each 4 x 36W lamps, Total 1152 W | |
Side lights | 8 Units, each2 x 36W lamps, Total 576W | ||
Illumination | 1000LUX | ||
Controlling system | Switched control panel | Spraying & baking switch, lighting switch, emergency stop, breakdown alarm, pressure gauge, timer, etc. |
Q: What standards are you carrying out for your products?